Nonreciprocal vortex isolator via topology-selective stimulated Brillouin scattering

Xinglin Zeng, Philip Russell, Christian Wolff , Michael Frosz, Gordon Wong, Birgit Stiller

Optical nonreciprocity, which breaks the symmetry between forward and backward propagating optical waves, has become vital in photonic systems and enables many key applications. So far, all the existing nonreciprocal systems are implemented for linearly or randomly polarized fundamental modes. Optical vortex modes, with wavefronts that spiral around the central axis of propagation, have been extensively studied over the past decades and offer an additional degree of freedom useful in many applications. Here, we report a light-driven nonreciprocal isolation system for optical vortex modes based on topology-selective stimulated Brillouin scattering (SBS) in chiral photonic crystal fiber. The device can be reconfigured as an amplifier or an isolator by adjusting the frequency of the control signal. The experimental results show vortex isolation of 22 decibels (dB), which is at the state of the art in fundamental mode isolators using SBS. This device may find applications in optical communications, fiber lasers, quantum information processing, and optical tweezers.

Label-free monitoring of proteins in optofluidic hollow-core photonic crystal fibres

Jan R. Heck , Ermanno Miele, Ralf Mouthaan, Michael Frosz, Tuomas P J Knowles, Tijmen G Euser

The fluorescent detection of proteins without labels or stains, which affect their behaviour and require additional genetic or chemical preparation, has broad applications to biological research. However, standard approaches require large sample volumes or analyse only a small fraction of the sample. Here we use optofluidic hollow-core photonic crystal fibres to detect and quantify sub-microlitre volumes of unmodified bovine serum albumin (BSA) protein down to 100 nM concentrations. The optofluidic fibre's waveguiding properties are optimised for guidance at the (auto)fluorescence emission wavelength, enabling fluorescence collection from a 10 cm long excitation region, increasing sensitivity. The observed spectra agree with spectra taken from a conventional cuvette-based fluorimeter, corrected for the guidance properties of the fibre. The BSA fluorescence depended linearly on BSA concentration, while only a small hysteresis effect was observed, suggesting limited biofouling of the fibre sensor. Finally, we briefly discuss how this method could be used to study aggregation kinetics. With small sample volumes, the ability to use unlabelled proteins, and continuous flow, the method will be of interest to a broad range of protein-related research.

Strong circular dichroism for the HE11 mode in twisted single-ring hollow-core photonic crystal fiber: erratum

Paul Roth, Yang Chen, Mehmet Can Günendi, Ramin Beravat, Nitin Edavalath, Michael Frosz, Goran Ahmed, Gordon Wong, Philip Russell

Recent work has revealed that the dispersion relation, given inOptica 5, 1315 (2018), for helicalBloch modes in a ring of capillaries surrounding a central hollowcore, is incorrect.Herewe correct this error and provide a revised version of Fig. 2. The overall conclusions of the original paper are unaffected.

Erratum to “Bragg Reflection and Conversion Between Helical Bloch Modes in Chiral Three-Core Photonic Crystal Fiber”

Sébastien Loranger, Yang Chen, Paul Roth, Michael Frosz, Gordon Wong, Philip Russell

The dispersion relation for the helical Bloch modes in this paper contains an error, which affects Equation (3) in the original manuscript, as well as Fig. 2. Otherwise the conclusions of the paper are unaffected.

Stern–Volmer analysis of photocatalyst fluorescence quenching within hollow-core photonic crystal fibre microreactors

Alexander S. Gentleman, Takashi Lawson, Matthew G. Ellis, Molly Davis, Jacob Turner-Dore, Alison S. H. Ryder, Michael Frosz, Maria Ciaccia, Erwin Reisner, et al.

We report the use of optofluidic hollow-core photonic crystal fibres as microreactors for Stern–Volmer (SV) luminescence quenching analysis of visible-light photocatalytic reactions. This technology enables measurements on nanolitre volumes and paves the way for automated SV analyses in continuous flow that minimise catalyst and reagent usage. The method is showcased using a recently developed photoredox-catalysed α-C–H alkylation reaction of unprotected primary alkylamines.

Hollow-core optical fibre sensors for operando Raman spectroscopy investigation of Li-ion battery liquid electrolytes

Ermanno Miele, Wesley M. Dose, Ilya Manyakin, Michael Frosz, Zachary Ruff, Michael F. L. De Volder, Clare P. Grey, Jeremy J. Baumberg, Tijmen G. Euser

Improved analytical tools are urgently required to identify degradation and failure mechanisms in Li-ion batteries. However, understanding and ultimately avoiding these detrimental mechanisms requires continuous tracking of complex electrochemical processes in different battery components. Here, we report an operando spectroscopy method that enables monitoring the chemistry of a carbonate-based liquid electrolyte during electrochemical cycling in Li-ion batteries with a graphite anode and a LiNi0.8Mn0.1Co0.1O2 cathode. By embedding a hollow-core optical fibre probe inside a lab-scale pouch cell, we demonstrate the effective evolution of the liquid electrolyte species by background-free Raman spectroscopy. The analysis of the spectroscopy measurements reveals changes in the ratio of carbonate solvents and electrolyte additives as a function of the cell voltage and show the potential to track the lithium-ion solvation dynamics. The proposed operando methodology contributes to understanding better the current Li-ion battery limitations and paves the way for studies of the degradation mechanisms in different electrochemical energy storage systems.

Stimulated Brillouin scattering in chiral photonic crystal fiber

Xinglin Zeng, Wenbin He, Michael Frosz, Andreas Geilen, Paul Roth, Gordon Wong, Philip Russell, Birgit Stiller

Stimulated Brillouin scattering (SBS) has many applications; for example, in sensing, microwave photonics, and signal processing. Here, we report the first experimental study of SBS in chiral photonic crystal fiber (PCF), which displays optical activity and robustly maintains circular polarization states against external perturbations. As a result, circularly polarized pump light is cleanly backscattered into a Stokes signal with the orthogonal circular polarization state, as is required by angular momentum conservation. By comparison, untwisted PCF generates a Stokes signal with an unpredictable polarization state, owing to its high sensitivity to external perturbations. We use chiral PCF to realize a circularly polarized continuous-wave Brillouin laser. The results pave the way for a new generation of stable circularly polarized SBS systems with applications in quantum manipulation, optical tweezers, optical gyroscopes, and fiber sensors.

Efficient Excitation of High-Purity Modes in Arbitrary Waveguide Geometries

Ralf Mouthaan, Peter J. Christopher, Jonathan Pinnell, Michael Frosz, George Gordon, Timothy D. Wilkinson, Tijmen G. Euser

A general method is presented for exciting discrete modes in waveguides of arbitrary geometry. Guided modes supported by the waveguide are first calculated using a finite difference frequency domain model. High efficiency holograms to excite these discrete modes are then generated using the Direct Search hologram generation algorithm. The Direct Search algorithm is optimised such that the inherent properties of waveguide modes are exploited to give faster execution times. A nodeless antiresonant photonic crystal fibre is considered as a test geometry, in which high-purity modes are experimentally excited and in-coupling efficiencies of up to 32.8% are obtained.

Scaling rules for high quality soliton self-compression in hollow-core fibers

Daniel Schade, Felix Köttig, Johannes Köhler, Michael H. Frosz, Philip St.J. Russell, Francesco Tani

Soliton dynamics can be used to temporally compress laser pulses to few fs durations in many different spectral regions. Here we study analytically, numerically and experimentally the scaling of soliton dynamics in noble gas-filled hollow-core fibers. We identify an optimal parameter region, taking account of higher-order dispersion, photoionization, self-focusing, and modulational instability. Although for single-shots the effects of photoionization can be reduced by using lighter noble gases, they become increasingly important as the repetition rate rises. For the same optical nonlinearity, the higher pressure and longer diffusion times of the lighter gases can considerably enhance the long-term effects of ionization, as a result of pulse-by-pulse buildup of refractive index changes. To illustrate the counter-intuitive nature of these predictions, we compressed 250 fs pulses at 1030 nm in an 80-cm-long hollow-core photonic crystal fiber (core radius 15 µm) to ∼5 fs duration in argon and neon, and found that, although neon performed better at a repetition rate of 1 MHz, stable compression in argon was still possible up to 10 MHz.

Optofluidic photonic crystal fiber microreactors for in-situ studies of carbon nanodot-driven photoreduction

Philipp Koehler, Takashi Lawson, Julian Neises, Janina Willkomm, Benjamin C. M. Martindale , Georgina A. M. Hutton, Daniel Antón-García, Ava Lage, Alexander S. Gentleman, et al.

Performing quantitative in situ spectroscopic analysis on minuscule sample volumes is a common difficulty in photochemistry. To address this challenge, we use a hollow-core photonic crystal fiber (HC-PCF) that guides light at the center of a microscale liquid channel and acts as an optofluidic microreactor with a reaction volume of less than 35 nL. The system was used to demonstrate in situ optical detection of photoreduction processes that are key components of many photocatalytic reaction schemes. The photoreduction of viologens (XV2+) to the radical XV•+ in a homogeneous mixture with carbon nanodot (CND) light absorbers is studied for a range of different carbon dots and viologens. Time-resolved absorption spectra, measured over several UV irradiation cycles, are interpreted with a quantitative kinetic model to determine photoreduction and photobleaching rate constants. The powerful combination of time-resolved, low-volume absorption spectroscopy and kinetic modeling highlights the potential of optofluidic microreactors as a highly sensitive, quantitative, and rapid screening platform for novel photocatalysts and flow chemistry in general.

Cross-phase modulational instability of circularly polarized helical Bloch modes carrying optical vortices in a chiral three-core photonic crystal fiber

Paul Roth, Michael Frosz, Linda Weise, Philip Russell, Gordon Wong

We report the first, to the best of our knowledge, observation of cross-phase modulational instability (XPMI) of circularly polarized helical Bloch modes carrying optical vortices in a twisted photonic crystal fiber with a three-fold symmetric core, formed by spinning the fiber preform during the draw. When the fiber is pumped by a superposition of left-circular polarization (LCP) and right-circular polarization (RCP) modes, a pair of orthogonal circularly polarized sidebands of opposite topological charge is generated. When, on the other hand, a pure LCP (or RCP) mode is launched, the XPMI gain is zero, and no sidebands are seen. This observation has not been seen before in any system and is unique to chiral structures with N-fold rotational symmetry. The polarization state and topological charge of the generated sidebands are measured. By decomposing the helical Bloch modes into their azimuthal harmonics, we are able to deduce the selection rules for the appearance of modulational instability sidebands. We showed that the four waves in the nonlinear mixing process must exhibit the same set of azimuthal harmonic orders.

Seven-octave high-brightness and carrier-envelope-phase-stable light source

Ugaitz Elu, Luke Maidment, Lenard Vamos, Francesco Tani, David Novoa, Michael H. Frosz, Valeriy Badikov, Dmitrii Badikov, Valentin Petrov, et al.

High-brightness sources of coherent and few-cycle-duration light waveforms with spectral coverage from the ultraviolet to the terahertz would offer unprecedented versatility and opportunities for a wide range of applications from bio-chemical sensing1 to time-resolved and nonlinear spectroscopy, and to attosecond light-wave electronics. Combinations of various sources with frequency conversion and supercontinuum generation can provide relatively large spectral coverage, but many applications require a much broader spectral range and low-jitter synchronization for time-domain measurements. Here, we present a carrier-envelope-phase (CEP)-stable light source, seeded by a mid-infrared frequency comb, with simultaneous spectral coverage across seven optical octaves, from the ultraviolet (340 nm) into the terahertz (40,000 nm). Combining soliton self-compression and dispersive wave generation in an anti-resonant-reflection photonic-crystal fibre with intra-pulse difference frequency generation in BaGa2GeSe6, the spectral brightness is two to five orders of magnitude above that of synchrotron sources. This will enable high-dynamic-range spectroscopies and provide numerous opportunities in attosecond physics and material sciences.

Three-photon head-mounted microscope for imaging deep cortical layers in freely moving rats

Alexandr Klioutchnikov, Damian James Wallace, Michael H. Frosz, Richard Zeltner, Jürgen Sawinski, Verena Pawlak, Kay-Michael Voit, Philip St. J. Russell, Jason Kerr

We designed a head-mounted three-photon microscope for imaging deep cortical layer neuronal activity in a freely moving rat. Delivery of high-energy excitation pulses at 1,320 nm required both a hollow-core fiber whose transmission properties did not change with fiber movement and dispersion compensation. These developments enabled imaging at >1.1 mm below the cortical surface and stable imaging of layer 5 euronal activity for >1 h in freely moving rats performing a range of behaviors.

Bragg Reflection and Conversion Between Helical Bloch Modes in Chiral Three-Core Photonic Crystal Fiber

Sébastien Loranger, Yang Chen, Paul Roth, Michael Frosz, Gordon Wong, Philip Russell

Optical fiber modes carrying orbital angular momentum (OAM) have many applications, for example in mode-division-multiplexing for optical communications. The natural guided modes of N-fold rotationally symmetric optical fibers, such as most photonic crystal fibers, are helical Bloch modes (HBMs). HBMs consist of a superposition of azimuthal harmonics (order m) of order l_A(m)=l_A(0)+mN. When such fibers are twisted, these modes become circularly and azimuthally birefringent, that is to say HBMs with equal and opposite values of l_A(0) and spin s are non-degenerate. In this article we report the use of Bragg mirrors to reflect and convert HBMs in a twisted three-core photonic crystal fiber, and show that by writing a tilted fiber Bragg grating (FBG), reflection between HBMs of different orders becomes possible, with high wavelength-selectivity. We measure the near-field phase and amplitude distribution of the reflected HBMs interferometrically, and demonstrate good agreement with theory. This new type of FBG has potential applications in fiber lasers, sensing, quantum optics, and in any situation where creation, conversion, and reflection of OAM-carrying modes is required.

Progress toward third-order parametric down-conversion in optical fibers

A. Cavanna, J. Hammer, C. Okoth, E. Ortiz-Ricardo, H. Cruz-Ramirez, K. Garay-Palmett, A. B. U’Ren, M. Frosz, X. Jiang, et al.

Optical fibers have been considered an optimal platform for third-order parametric down-conversion since they can potentially overcome the weak third-order nonlinearity by their long interaction length. Here we present, in the first part, a theoretical derivation for the conversion rate both in the case of spontaneous generation and in the presence of a seed beam. Then we review three types of optical fibers and we examine their properties in terms of conversion efficiency and practical feasibility.

Robust excitation and Raman conversion of guided vortices in a chiral gas-filled photonic crystal fiber

Sona Davtyan, Yang Chen, Michael Frosz, Philip Russell, David Novoa

The unique ring-shaped intensity patterns and helical phase fronts of optical vortices make them useful in many applications. Here we report for the first time, to the best of our knowledge, efficient Raman frequency conversion between vortex modes in a twisted hydrogen-filled single-ring hollow core photonic crystal fiber (SR-PCF). High-fidelity transmission of optical vortices in an untwisted SR-PCF becomes<br>more and more difficult as the orbital angular momentum (OAM) order increases, due to scattering at structural imperfections in the fiber microstructure. In a helically twisted<br>SR-PCF, however, the degeneracy between left- and righthanded versions of the same mode is lifted, with the result<br>that they are topologically protected from such scattering. With launch efficiencies of ∼75%, a high damage threshold and broadband guidance, these fibers are ideal for performing nonlinear experiments that require the polarization<br>state and azimuthal order of the interacting modes to be preserved over long distances. Vortex coherence waves of internal molecular motion carrying angular momentum are excited in the gas, permitting the polarization and OAM of the Raman bands to be tailored, even in spectral regions where conventional solid-core waveguides are opaque or susceptible to optical damage.

Non-invasive real-time characterization of hollow-core photonic crystal fibers using whispering gallery mode spectroscopy

Michael Frosz, Riccardo Pennetta, Michael Enders, Goran Ahmed, Philip Russell

Single-ring hollow-core photonic crystal fibers, consisting of a ring of one or two thin-walled glass capillaries surrounding a central hollow core, hold great promise for use in optical communications and beam delivery, and are already being successfully exploited for extreme pulse compression and efficient wavelength conversion in gases. However, achieving low loss over long (km) lengths requires highly accurate maintenance of the microstructure—a major fabrication challenge. In certain applications, for example adiabatic mode transformers, it is advantageous to taper the fibers, but no technique exists for measuring the delicate and complex microstructure without first cleaving the taper at several positions along its length. In this Letter, we present a simple non-destructive optical method for measuring the diameter of individual capillaries. Based on recording the spectrum scattered from whispering gallery modes excited in the capillary walls, the technique is highly robust, allowing real-time measurement of fiber structure during the draw with sub-micron accuracy.

Spatio-temporal measurement of ionization-induced modal index changes in gas-filled PCF by prism-assisted side-coupling

Barbara M. Trabold, Mallika I. Suresh, Johannes R. Köhler, Michael H. Frosz, Francesco Tani, Philip St. J. Russell

We report the use of prism-assisted side-coupling to investigate the spatio-temporal dynamics of photoionization in an Ar-filled hollow-core photonic crystal fiber. By launching four different LP core modes we are able to probe temporal and spatial changes in the modal refractive index on timescales from a few hundred picoseconds to several hundred microseconds after the ionization event. We experimentally analyze the underlying gas density waves and find good agreement with quantitative and qualitative hydrodynamic predictions. Moreover, we observe periodic modulations in the MHz-range lasting for a few microseconds, indicating nanometer-scale vibrations of the fiber structure, driven by gas density waves.

Full-field characterization of helical Bloch modes guided in twisted coreless photonic crystal fiber

Paul Roth, Gordon Wong, Michael Frosz, Goran Ahmed, Philip Russell

It was recently reported that a photonic crystal fiber (PCF) with no structural core guides light if a permanent chiral twist is introduced by spinning the fiber preform during the draw. The intriguing guidance mechanism behind this novel effect has many remarkable features; for example, it intrinsically supports circularly polarized helical Bloch modes (HBMs) that carry multiple optical vortices, making twisted PCFs of interest in fields such as optical micromanipulation, imaging, quantum optics, and optical communications. Here we report for the first time, to the best of our knowledge, that a twisted coreless PCF supports not just one but a family of guided HBMs, each member of which has a unique transverse field distribution and harmonic spectrum. By making detailed interferometric measurements of the near-field phase and amplitude distributions of HBMs, and expanding them as a series of Bessel beams, we are able to extract the amplitude of each azimuthal and radial HBM harmonic. Good agreement is found with the numerical solutions of Maxwell’s equations. The results shed light on the properties of this curious new optical phenomenon.

Pump-probe multi-species CARS in a hollow-core PCF with a 20 ppm detection limit under ambient conditions

Rinat Tyumenev, Luisa Späth, Barbara M. Trabold, Goran Ahmed, Michael H. Frosz, Philip St. J. Russell

We report coherent anti-Stokes Raman spectroscopy (CARS) in a gas-filled single-ring hollow-core photonic crystal fiber (SR-PCF) using a pump-probe configuration. The long collinear path length offered by an SR-PCF strongly enhances the efficiency of the Raman interactions. Pressure tuning the zero-dispersion wavelength (ZDW) of the SR-PCF allows the Raman coherence prepared by seeded pumping at 515 nm to be used in the visible for phase-matched generation of an anti-Stokes signal from a probe in the ultraviolet. The unique dispersion profile in the vicinity of the ZDW enables simultaneous phase matching of all known Raman transitions. We demonstrate that simultaneous multi-species CARS with a detection limit of 20 ppm is possible with only 20 kW of peak pump power delivered by a single laser source.

Generation of broadband circularly polarized supercontinuum light in twisted photonic crystal fibers

Rafal Sopalla, Gordon Wong, Nicolas Joly, Michael Frosz, Xin Jiang, Goran Ahmed, Philip Russell

We compare the properties of the broadband supercontinuum (SC) generated in twisted and untwisted solid-core photonic crystal fibers when pumped by circularly polarized<br>40 picosecond laser pulses at 1064 nm. In the helically twisted fiber, fabricated by spinning the preform during the draw, the SC is robustly circularly polarized across its entire<br>spectrum whereas, in the straight fiber, axial fluctuations in linear birefringence and polarization-dependent nonlinear effects cause the polarization state to vary randomly with the wavelength. Theoretical modelling confirms the experimental results. Helically twisted photonic crystal fibers permit the generation of pure circularly polarized SC light with excellent polarization stability against fluctuations in input power and environmental perturbations.

Fabrication and non-destructive characterization of tapered single-ring hollow-core photonic crystal fiber

Riccardo Pennetta, Michael T. Enders, Michael H. Frosz, Francesco Tani, Philip St. J. Russell

We report on the properties of tapered single-ring hollow-core photonic-crystal fibers, with a particular emphasis on applications in nonlinear optics. The simplicity of these structures allows the use of non-invasive side-illumination to assess the quality of the tapering process, by<br>observing the scattered far-field spectrum originating from excitation of whispering-gallery modes in the cladding capillaries. We investigate the conditions that ensure adiabatic propagation in the up- and down-tapers, and the scaling of loss-bands (created by anti-crossings between the core mode and modes in the capillary walls) with taper ratio. We also present an analytical model for the pressure profile along a tapered hollow fiber under differential pumping

Optically Addressable Array of Optomechanically Compliant Glass Nanospikes on the Endface of a Soft-Glass Photonic Crystal Fiber

Zheqi Wang, Shangran Xie, Xin Jiang, Fehim Babic, Jiapeng Huang, Riccardo Pennetta, Johannes Köhler, Philip Russell

Arrays of elongated nanoscale structures with suitable optical and mechanical properties can act as probes of numerous physical processes at the nanoscale, with applications in, for example, high-resolution optical imaging and atomic force microscopy. They can also be used to investigate optomechanical phenomena such as synchronization among large assemblies of mechanical oscillators. Here we report a novel and versatile technique for fabricating two-dimensional light-guiding arrays of mechanically compliant glass nanospikes with lengths up to several hundred micrometers. The procedure starts with a multicore fiber made by stacking and drawing capillaries and rods of two different germanate glasses with markedly different acid etching rates. After a suitable etching step, a free-standing nanospike array is created at the fiber endface. The parameters are chosen so that there is evanescent coupling between adjacent nanospikes, which gives rise to strong optomechanical forces that can be exploited to drive and control the mechanical motion of the nanospikes and thus the optical properties.

MRI-guided robotic arm drives optogenetic fMRI with concurrent Ca2+ recording

Y Chen, P Pais-Roldán, X Chen, Michael Frosz, X Yu

Optical fiber-mediated optogenetic activation and neuronal Ca2+ recording in combination with fMRI provide a multi-modal fMRI platform. Here, we developed an MRI-guided robotic arm (MgRA) as a flexible positioning system with high precision to real-time assist optical fiber brain intervention for multi-modal animal fMRI. Besides the ex vivo precision evaluation, we present the highly reliable brain activity patterns in the projected basal forebrain regions upon MgRA-driven optogenetic stimulation in the lateral hypothalamus. Also, we show the step-wise optical fiber targeting thalamic nuclei and map the region-specific functional connectivity with whole-brain fMRI accompanied by simultaneous calcium recordings to specify its circuit-specificity. The MgRA also guides the real-time microinjection to specific deep brain nuclei, which is demonstrated by an Mn-enhanced MRI method. The MgRA represents a clear advantage over the standard stereotaxic-based fiber implantation and opens a broad avenue to investigate the circuit-specific functional brain mapping with the multi-modal fMRI platform.

Polarization-Tailored Raman Frequency Conversion in Chiral Gas-Filled Hollow-Core Photonic Crystal Fibers

Sona Davtyan, David Novoa, Yang Chen, Michael H. Frosz, Philip St. J. Russell

Broadband-tunable sources of circularly polarized light are crucial in fields such as laser science, biomedicine, and spectroscopy. Conventional sources rely on nonlinear wavelength conversion and polarization control using standard optical components and are limited by the availability of suitably transparent crystals and glasses. Although a gas-filled hollow-core photonic crystal fiber provides pressuretunable dispersion, long well-controlled optical path lengths, and high Raman conversion efficiency, it is unable to preserve a circular polarization state, typically exhibiting weak linear birefringence. Here we report a revolutionary approach based on a helically twisted hollow-core photonic crystal fiber, which displays circular birefringence, thus robustly maintaining a circular polarization state against external perturbations. This makes it possible to generate pure circularly polarized Stokes and anti-Stokes signals by rotational Raman scattering in hydrogen. The polarization state of the frequency-shifted Raman bands can be continuously varied by tuning the gas pressure in the vicinity of the gain-suppression point. The results pave the way to a new generation of compact and efficient fiber-based sources of broadband light with a fully controllable polarization state.

Rare-earth ion doped TeO2 and GeO2 glasses as laser materials

Animesh Jha, Billy Richards, Gin Jose, Toney Teddy-Fernandez, Purushottam Joshi, Xin Jiang, Joris Lousteau

Germanium oxide (GeO2) and tellurium oxide (TeO2) based glasses are classed as the heavy metal oxide glasses, with phonon energies ranging between 740 cm(-1) and 880 cm(-1). These two types of glasses exhibit unique combinations of optical and spectroscopic properties, together with their attractive environmental resistance and mechanical properties. Engineering such a combination of structural, optical and spectroscopic properties is only feasible as a result of structural variability in these two types of glasses, since more than one structural units (TeO4 bi-pyramid, TeO3 trigonal pyramid, and TeO3+delta polyhedra) in tellurite and (GeO4 tetrahedron, GeO3 octahedron) in GeO2 based glasses may exist, depending on composition. The presence of multiple structural moities creates a range of dipole environments which is ideal for engineering broad spectral bandwidth rare-earth ion doped photonic device materials, suitable for laser and amplifier devices. Tellurite glasses were discovered in 1952, but remained virtually unknown to materials and device engineers until 1994 when unusual spectroscopic, nonlinear and dispersion properties of alkali and alkaline earth modified tellurite glasses and fibres were reported. Detailed spectroscopic analysis of Pr3+, Nd3+, Er3+ and Tm3+ doped tellurite glasses revealed its potential for laser and amplifier devices for optical communication wavelengths. This review summarises the thermal and viscosity properties of tellurite and germanate glasses for fibre fabrication and compares the linear loss for near and mid-IR device engineering. The aspects of glass preform fabrication for fibre engineering is discussed by emphasising the raw materials processing with casting of preforms and fibre fabrication. The spectroscopic properties of tellurite and germanate glasses have been analysed with special emphasis on oscillator strength and radiative rate characteristics for visible, near IR and mid-IR emission. The review also compares the latest results in the engineering of lasers and amplifiers, based on fibres for optical communication and mid-IR. The achievements in the areas of near-IR waveguide and mid-IR bulk glass, fibre, and waveguide lasers are discussed. The latest landmark results in mode-locked 2 mu m bulk glass lasers sets the precedence for engineering nonlinear and other laser devices for accessing the inaccessible parts of the mid-IR spectrum and discovering new applications for the future. (c) 2012 Elsevier Ltd. All rights reserved.

Kagome hollow-core photonic crystal fiber probe for Raman spectroscopy

Petru Ghenuche, Silke Rammler, Nicolas Y. Joly, Michael Scharrer, Michael Frosz, Jerome Wenger, Philip St J. Russell, Herve Rigneault

We demonstrate the use of a large-pitch Kagome-lattice hollow-core photonic crystal fiber probe for Raman spectroscopy. The large transmission bandwidth of the fiber enables both the excitation and Raman beams to be transmitted through the same fiber. As the excitation beam is mainly transmitted through air inside the hollow core, the silica luminescence background is reduced by over 2 orders of magnitude as compared to standard silica fiber probes, removing the need for fiber background subtraction. (C) 2012 Optical Society of America

Nonlinear fiber-optic strain sensor based on four-wave mixing in microstructured optical fiber

Bobo Gu, Wu Yuan, Michael H. Frosz, A. Ping Zhang, Sailing He, Ole Bang

We demonstrate a nonlinear fiber-optic strain sensor, which uses the shifts of four-wave mixing Stokes and anti-Stokes peaks caused by the strain-induced changes in the structure and refractive index of a microstructured optical fiber. The sensor thus uses the inherent nonlinearity of the fiber and does not require any advanced post-processing of the fiber. Strain sensitivity of -0.23 pm/mu epsilon is achieved experimentally and numerical simulations reveal that for the present fiber the sensitivity can be increased to -4.46 pm/mu epsilon by optimizing the pump wavelength and power. (C) 2012 Optical Society of America

Single-mode hollow-core photonic crystal fiber made from soft glass

X. Jiang, T. G. Euser, A. Abdolvand, F. Babic, F. Tani, N. Y. Joly, J. C. Travers, P. St J. Russell

We demonstrate the first soft-glass hollow core photonic crystal fiber. The fiber is made from a high-index lead-silicate glass (Schott SF6, refractive index 1.82 at 500 nm). Fabricated by the stack-and-draw technique, the fiber incorporates a 7-cell hollow core embedded in a highly uniform 6-layer cladding structure that resembles a kagome-like lattice. Effective single mode guidance of light is observed from 750 to 1050 nm in a large mode area (core diameter similar to 30 mu m) with a low loss of 0.74 dB/m. The underlying guidance mechanism of the fiber is investigated using finite element modeling. The fiber is promising for applications requiring single mode guidance in a large mode area, such as particle guidance, fluid and gas filled devices. (C) 2011 Optical Society of America

Excitation of higher-order modes in optofluidic photonic crystal fiber

Andrei Ruskuc, Philipp Koehler, Marius A. Weber, Ana Andres-Arroyo, Michael H. Frosz, Philip St. J. Russell, Tijmen G. Euser

Higher-order modes up to LP33 are controllably excited in water-filled kagomé- and bandgap-style hollow-core photonic crystal fibers (HC-PCF). A spatial light modulator is used to create amplitude and phase distributions that closely match those of the fiber modes, resulting in typical launch efficiencies of 10–20% into the liquid-filled core. Modes, excited across the visible wavelength range, closely resemble those observed in air-filled kagomé HC-PCF and match numerical simulations. Mode indices are obtained by launching plane-waves at specific angles onto the fiber input-face and comparing the resulting intensity pattern to that of a particular mode. These results provide a framework for spatially-resolved sensing in HC-PCF microreactors and fiber-based optical manipulation.

Three-dimensional holographic optical manipulation through a high-numerical-aperture soft-glass multimode fibre

Ivo T. Leite, Sergey Turtaev, Xin Jiang, Martin Siler, Alfred Cuschieri, Philip St. J. Russell, Tomas Cizmar

Holographic optical tweezers (HOT) hold great promise for many applications in biophotonics, allowing the creation and measurement of minuscule forces on biomolecules, molecular motors and cells. Geometries used in HOT currently rely on bulk optics, and their exploitation in vivo is compromised by the optically turbid nature of tissues. We present an alternative HOT approach in which multiple three-dimensional (3D) traps are introduced through a high-numerical-aperture multimode optical fibre, thus enabling an equally versatile means of manipulation through channels having cross-section comparable to the size of a single cell. Our work demonstrates real-time manipulation of 3D arrangements of micro-objects, as well as manipulation inside otherwise inaccessible cavities. We show that the traps can be formed over fibre lengths exceeding 100 mm and positioned with nanometric resolution. The results provide the basis for holographic manipulation and other high-numerical-aperture techniques, including advanced microscopy, through single-core-fibre endoscopes deep inside living tissues and other complex environments.

Strong circular dichroism for the HE11 mode in twisted single-ring hollow-core photonic crystal fiber

Paul Roth, Yang Chen, Mehmet Can Günendi, Ramin Beravat, Nitin N. Edavalath, Michael H. Frosz, Goran Ahmed, Gordon K. L. Wong, Philip St. J. Russell

We report a series of experimental, analytical, and numerical studies demonstrating strong circular dichroism for the HE11-like core mode in helically twisted hollow-core single-ring photonic crystal fiber (SR-PCF), formed by spinning the preform during fiber drawing. In the SR-PCFs studied, the hollow core is surrounded by a single ring of nontouching capillaries. Coupling between these capillaries results in the formation of helical Bloch modes carrying orbital angular momentum. When twisted, strong circular birefringence appears in the ring, so that coupling to the core mode is possible for only one circular polarization state. The result is a SR-PCF that acts as a circular polarizer, offering 1.4 dB/m for the low-loss polarization state and 9.7 dB/m for the high-loss state over a 25 nm band centered at 1593 nm wavelength. In addition, we report for the first time that the vector fields of the helical Bloch modes are perfectly periodic when evaluated in cylindrical coordinates. Such fibers have many potential applications, such as generating circularly polarized light in gas-filled SR-PCF and realizing polarizing elements in the deep and vacuum ultraviolet.

Photonic crystal fibers for generating three-photon states

Maria V. Chekhova, Andrea Cavanna, M. Taheri, Cameron Okoth, Xin Jiang, Nicolas Joly, Philip St. J. Russell

Direct decay of pump photons into triplets is an interesting but not-yet-realized nonlinear effect. We are exploring two approaches using photonic crystal fibers: a gas-filled hollow-core PCF and the recently designed hybrid solid-core PCF.

Soft-glass photonic crystal fibers: from advanced fabrication techniques to novel applications

Xin Jiang, Jiapeng Huang, Fehim Babic, Rafal Sopalla, Nicolas Y. Joly, Philip St. J. Russell

We report on recent advances in soft-glass photonic crystal fibers that make use of improved stack-and-draw and extrusion techniques, and on their use in supercontinuum generation, photochemistry and triplet photon generation.

Generation of broadband mid-IR and UV light in gas-filled single-ring hollow-core PCF

Marco Cassataro, David Novoa, Mehmet C. Guenendi, Nitin N. Edavalath, Michael H. Frosz, John C. Travers, Philip St. J. Russell

We report generation of an ultrafast supercontinuum extending into the mid-infrared in gas-filled single-ring hollow-core photonic crystal fiber (SR-PCF) pumped by 1.7 mu m light from an optical parametric amplifier. The simple fiber structure offers shallow dispersion and flat transmission in the near and mid-infrared, enabling the generation of broadband spectra extending from 270 nm to 3.1 mu m, with a total energy of a few mu J. In addition, we demonstrate the emission of ultraviolet dispersive waves whose frequency can be tuned simply by adjusting the pump wavelength. SR-PCF thus constitutes an effective means of compressing and delivering tunable ultrafast pulses in the near and mid-infrared spectral regions. (C) 2017 Optical Society of America

High average power and single-cycle pulses from a mid-IR optical parametric chirped pulse amplifier

Ugaitz Elu, Matthias Baudisch, Hugo Pires, Francesco Tani, Michael H. Frosz, Felix Koettig, Alexey Ermolov, Philip St J. Russell, Jens Biegert

In attosecond and strong-field physics, the acquisition of data in an acceptable time demands the combination of high peak power with high average power. We report a 21 W mid-IR optical parametric chirped pulse amplifier (OPCPA) that generates 131 mu J and 97 fs (sub-9-cycle) pulses at a 160 kHz repetition rate and at a center wavelength of 3.25 mu m. Pulse-to-pulse stability of the carrier envelope phase (CEP)-stable output is excellent with a 0.33% rms over 288 million pulses (30 min) and compression close to a single optical cycle was achieved through soliton self-compression inside a gas-filled mid-IR antiresonant-guiding photonic crystal fiber. Without any additional compression device, stable generation of 14.5 fs (1.35-optical-cycle) pulses was achieved at an average power of 9.6 W. The resulting peak power of 3.9 GW in combination with the near-single-cycle duration and intrinsic CEP stability makes our OPCPA a key-enabling technology for the next generation of extreme photonics, strong-field attosecond research, and coherent x-ray science. (C) 2017 Optical Society of America

Photochemistry in a soft-glass single-ring hollow-core photonic crystal fibre

Ana M. Cubillas, Xin Jiang, Tijmen G. Euser, Nicola Taccardi, Bastian J. M. Etzold, Peter Wasserscheid, Philip St. J. Russell

A hollow-core photonic crystal fibre (HC-PCF), guided by photonic bandgap effects or anti-resonant reflection, offers strong light confinement and long photochemical interaction lengths in a microscale channel filled with a solvent of refractive index lower than that of glass (usually fused silica). These unique advantages have motivated its recent use as a highly efficient and versatile microreactor for liquid-phase photochemistry and catalysis. In this work, we use a single-ring HC-PCF made from a high-index soft glass, thus enabling photochemical experiments in higher index solvents. The optimized light-matter interaction in the fibre is used to strongly enhance the reaction rate in a proof-of-principle photolysis reaction in toluene.

Continuously wavelength-tunable high harmonic generation via soliton dynamics

Francesco Tani, Michael H. Frosz, John C. Travers, Philip St. J. Russell

We report the generation of high harmonics in a gas jet pumped by pulses self-compressed in a He-filled hollow-core photonic crystal fiber through the soliton effect. The gas jet is placed directly at the fiber output. As the energy increases, the ionization-induced soliton blueshift is transferred to the high harmonics, leading to emission bands that are continuously tunable from 17 to 45 eV. (C) 2017 Optical Society of America

Higher-order mode suppression in twisted single-ring hollow-core photonic crystal fibers

N. N. Edavalath, M. C. Guenendi, R. Beravat, G. K. L. Wong, M. H. Frosz, J. -M. Menard, P. St. J. Russell

A hollow-core single-ring photonic crystal fiber (SR-PCF) consists of a ring of capillaries arranged around a central hollow core. Spinning the preform during drawing introduces a continuous helical twist, offering a novel means of controlling the modal properties of hollow-core SR-PCF. For example, twisting geometrically increases the effective axial propagation constant of the LP01-like modes of the capillaries, providing a means of optimizing the suppression of HOMs, which occurs when the LP11-like core mode phase-matches to the LP01-like modes of the surrounding capillaries. (In a straight fiber, optimum suppression occurs for a capillary-to-core diameter ratio d/D = 0.682.) Twisting also introduces circular birefringence (to be studied in a future Letter) and has a remarkable effect on the transverse intensity profiles of the higher-order core modes, forcing the two-lobed LP11-like mode in the untwisted fiber to become three-fold symmetric in the twisted case. These phenomena are explored by means of extensive numerical modeling, an analytical model, and a series of experiments. Prism-assisted side-coupling is used to measure the losses, refractive indices, and near-field patterns of individual fiber modes in both the straight and twisted cases. (C) 2017 Optical Society of America

Analytical formulation for the bend loss in single-ring hollow-core photonic crystal fibers

Michael H. Frosz, Paul Roth, Mehmet C. Guenendi, Philip St. J. Russell

Understanding bend loss in single-ring hollow-core photonic crystal fibers (PCFs) is becoming of increasing importance as the fibers enter practical applications. While purely numerical approaches are useful, there is a need for a simpler analytical formalism that provides physical insight and can be directly used in the design of PCFs with low bend loss. We show theoretically and experimentally that a wavelength-dependent critical bend radius exists below which the bend loss reaches a maximum, and that this can be calculated from the structural parameters of a fiber using a simple analytical formula. This allows straightforward design of single-ring PCFs that are bend-insensitive for specified ranges of bend radius and wavelength. It also can be used to derive an expression for the bend radius that yields optimal higher-order mode suppression for a given fiber structure. (C) 2017 Chinese Laser Press

Reducing losses in solid-core photonic crystal fibers using chlorine dehydration

Michael H. Frosz, Goran Ahmed, Nadezda Lapshina, Ralf Keding, Fehim Babic, Nicolas Y. Joly, Philip St. J. Russell

Hybrid photonic crystal fiber for efficient single-mode third-harmonic and triplet photon generation

Andrea Cavanna, Felix Just, Xin Jiang, Maria V. Chekhova, Gerd Leuchs, Philip St. J. Russell, Nicolas Y. Joly

Supercontinuum generation in microstructured ZBLAN fibre with six nanobore cores

X. Jiang, N. Y. Joly, M. A. Finger, F. Babic, R. Sopalla, M. H. Frosz, S. Poulain, M. Poulain, V. Cardin, et al.

Twist-induced guidance in coreless photonic crystal fiber: A helical channel for light

Ramin Beravat, Gordon K. L. Wong, Michael H. Frosz, Xiao Ming Xi, Philip St. J. Russell

Hybrid photonic-crystal fiber for single-mode phase matched generation of third harmonic and photon triplets

Andrea Cavanna, Felix Just, Xin Jiang, Gerd Leuchs, Maria V. Chekhova, Philip St. J. Russell, Nicolas Y. Joly

Broadband robustly single-mode hollow-core PCF by resonant filtering of higher-order modes

Patrick Uebel, Mehmet C. Guenendi, Michael H. Frosz, Goran Ahmed, Nitin N. Edavalath, Jean-Michel Menard, Philip St. J. Russell

We report a hollow-core photonic crystal fiber that is engineered so as to strongly suppress higher-order modes, i.e., to provide robust LP01 single-mode guidance in all the wavelength ranges where the fiber guides with low loss. Encircling the core is a single ring of nontouching glass elements whose modes are tailored to ensure resonant phase-matched coupling to higher-order core modes. We show that the resulting modal filtering effect depends on only one dimensionless shape parameter, akin to the well-known d/Lambda parameter for endlessly single-mode solid-core PCF. Fabricated fibers show higher-order mode losses some similar to 100 higher than for the LP01 mode, with LP01 losses <0.2 dB/m in the near-infrared and a spectral flatness similar to 1 dB over a >110 THz bandwidth. (C) 2016 Optical Society of America

High-resolution wavefront shaping with a photonic crystal fiber for multimode fiber imaging

Lyubov V. Amitonova, Adrien Descloux, Joerg Petschulat, Michael H. Frosz, Goran Ahmed, Fehim Babic, Xin Jiang, Allard P. Mosk, Philip St. J. Russell, et al.

We demonstrate that a high-numerical-aperture photonic crystal fiber allows lensless focusing at an unparalleled resolution by complex wavefront shaping. This paves the way toward high-resolution imaging exceeding the capabilities of imaging with multi-core single-mode optical fibers. We analyze the beam waist and power in the focal spot on the fiber output using different types of fibers and different wavefront shaping approaches. We show that the complex wavefront shaping technique, together with a properly designed multimode photonic crystal fiber, enables us to create a tightly focused spot on the desired position on the fiber output facet with a subwavelength beam waist. (C) 2016 Optical Society of America

All-optical bit storage in a fibre laser by optomechanically bound states of solitons

M. Pang, W. He, X. Jiang, P. St. J. Russell

Soliton fibre lasers mode-locked at a high harmonic of their round-trip frequency have many potential applications, from telecommunications to data storage(1). Control of multiple pulses in passively mode-locked fibre lasers has, however, proved very difficult to achieve. This has recently changed with the advent of fibre lasers mode-locked by intense optomechanical interactions in a short length of photonic crystal fibre(2,3). Optomechanical coupling between cavity modes gives rise to highly stable, optomechanically bound, laser soliton states. The repetition rate of these states corresponds to the mechanical resonant frequency in the photonic crystal fibre core(4), which can be a few gigahertz. Here we show that this system can be successfully used for programmable generation and storage of gigahertz-rate soliton sequences over many hours.

Solid-core and hollow-core photonic crystal fiber for generation of bright ultraviolet light (Conference Presentation)

Nicolas Y. Joly, Xin Jiang, John C. Travers, Alexey Ermolov, Philip St. J. Russell

Current sensing using circularly birefringent twisted solid-core photonic crystal fiber

R. Beravat, G. K. L. Wong, X. M. Xi, M. H. Frosz, P. St. J. Russell

Continuously twisted solid-core photonic crystal fiber (PCF) exhibits pure circular birefringence (optical activity), making it ideal for current sensors based on the Faraday effect. By numerical analysis, we identify the PCF geometry for which the circular birefringence (which scales linearly with twist rate) is a maximum. For silica-air PCF, this occurs at a shape parameter (diameter-to-spacing ratio of the hollow channels) of 0.37 and a scale parameter (spacing-to-wavelength) of 1.51. This result is confirmed experimentally by testing a range of different structures. To demonstrate the effectiveness of twisted PCF as a current sensor, a length of fiber is placed on the axis of a 7.6 cm long solenoid, and the Faraday rotation is measured at different values of dc current. The system is then used to chart the wavelength dependence of the Verdet constant. (C) 2016 Optical Society of America

Compressing mu J-level pulses from 250 fs to sub-10 fs at 38-MHz repetition rate using two gas-filled hollow-core photonic crystal fiber stages

K. F. Mak, M. Seidel, O. Pronin, M. H. Frosz, A. Abdolvand, V. Pervak, A. Apolonski, F. Krausz, J. C. Travers, et al.

Compression of 250-fs, 1-mu J pulses from a KLM Yb:YAG thin-disk oscillator down to 9.1 fs is demonstrated. A kagome-PCF with a 36-mu m core-diameter is used with a pressure gradient from 0 to 40 bar of krypton. Compression to 22 fs is achieved by 1200 fs(2) group-delay-dispersion provided by chirped mirrors. By coupling the output into a second kagome-PCF with a pressure gradient from 0 to 25 bar of argon, octave spanning spectral broadening via the soliton-effect is observed at 18-W average output power. Self-compression to 9.1 fs is measured, with compressibility to 5 fs predicted. Also observed is strong emission in the visible via dispersive wave generation, amounting to 4% of the total output power. (C) 2015 Optical Society of America

Pushing the blue side of supercontinuum using photonic crystal fiber

Nicolas Joly, X. Jiang, K. F. Mak, J. C. Travers, P. St. J. Russell

Enhanced optical activity and circular dichroism in twisted photonic crystal fiber

G. K. L. Wong, X. M. Xi, M. H. Frosz, P. St. J. Russell

We demonstrate experimentally and theoretically that the core-guided mode in helically twisted photonic crystal fiber exhibits resonantly enhanced optical activity and circular dichroism in the vicinity of anti-crossings with leaky orbital angular momentum (OAM) modes in the cladding. This arises because the anti-crossings for left and right circularly polarized core modes occur at slightly different wavelengths. (C) 2015 Optical Society of America

Engineering of a Ge-Te-Se glass fibre evanescent wave spectroscopic (FEWS) mid-IR chemical sensor for the analysis of food and pharmaceutical products

Xin Jiang, Animesh Jha

Using an unclad multimode Ge-Te-Se based chalcogenide glass fibre, simple design robust fibre evanescent wave spectroscopic (FEWS) sensor is demonstrated. Methodologies adopted for material development and fibre drawing are discussed in the following steps: purification of raw materials for high spectral purity, fabrication of glass and fibre preform leading to fibre drawing. The fabricated fibre has a minimum loss of 1.4 dB/m at 4.2 mu m, and less than 3 dB/m between 1.5 and 6.3 mu m. The feasibility of using such a fibre for evanescent wave spectroscopic sensing has been verified by using the finite-element (FE) computation technique. Supported optical modes as well as corresponding penetration depths of evanescent fields from different modes are discussed. Based on the FE computation, a FEWS sensor consisting of a 40 cm Ge-Te-Se fibre, coupled with a Fourier transform infrared (FTIR) spectrometer and a liquid nitrogen cooled mercury-cadmium-tellurium (MCT) detector, is demonstrated. The active length along this fibre employed for sensing is 3 cm. Based on FEWS design, the fabricated fibre sensor was used for the analysis of chemicals, namely the acetone, ethanol, methanol, tocopherol (vitamin E), ascorbic acid (vitamin C), fresh orange and lemon juice. (C) 2014 Elsevier B.V. All rights reserved.

Stable subpicosecond soliton fiber laser passively mode-locked by gigahertz acoustic resonance in photonic crystal fiber core

M. Pang, X. Jiang, W. He, G. K. L. Wong, G. Onishchukov, N. Y. Joly, G. Ahmed, C. R. Menyuk, P. St J. Russell

Ultrafast lasers with high repetition rates are of considerable interest in applications such as optical fiber telecommunications, frequency metrology, high-speed optical sampling, and arbitrary waveform generation. For fiber lasers mode-locked at the cavity round-trip frequency, the pulse repetition rate is limited to tens or hundreds of megahertz by the meter-order cavity lengths. Here we report a soliton fiber laser passively mode-locked at a high harmonic (similar to 2 GHz) of its fundamental frequency by means of optoacoustic interactions in the small solid glass core of a short length ( 60 cm) of photonic crystal fiber. Due to tight confinement of both light and vibrations, the optomechanical interaction is strongly enhanced. The long-lived acoustic vibration provides strong modulation of the refractive index in the photonic crystal fiber core, fixing the soliton spacing in the laser cavity and allowing stable mode-locking, with low pulse timing jitter, at gigahertz repetition rates. (C) 2015 Optical Society of America

Deep-ultraviolet to mid-infrared supercontinuum generated in solid-core ZBLAN photonic crystal fibre

Xin Jiang, Nicolas Y. Joly, Martin A. Finger, Fehim Babic, Gordon K. L. Wong, John C. Travers, Philip St J. Russell

Silica-based photonic crystal fibre has proven highly successful for supercontinuum generation, with smooth and flat spectral power densities. However, fused silica glass suffers from strong material absorption in the mid-infrared (>2,500 nm), as well as ultraviolet-related optical damage (solarization), which limits performance and lifetime in the ultraviolet (<380 nm). Supercontinuum generation in silica photonic crystal fibre is therefore only possible between these limits. A number of alternative glasses have been used to extend the mid-infrared performance, including chalcogenides, fluorides and heavy-metal oxides, but none has extended the ultraviolet performance. Here, we describe the successful fabrication (using the stack-and-draw technique) of a ZBLAN photonic crystal fibre with a high air-filling fraction, a small solid core, nanoscale features and near-perfect structure. We also report its use in the generation of ultrabroadband, long-term stable, supercontinua spanning more than three octaves in the spectral range 200-2,500 nm.

Supercontinuum generation in the vacuum ultraviolet through dispersive-wave and soliton-plasma interaction in a noble-gas-filled hollow-core photonic crystal fiber

A. Ermolov, K. F. Mak, M. H. Frosz, J. C. Travers, P. St. J. Russell

We report on the generation of a three-octave-wide supercontinuum extending from the vacuum ultraviolet (VUV) to the near infrared, spanning at least 113-1000 nm (i.e., 11-1.2eV), in He-filled hollow-core kagome-style photonic crystal fiber. Numerical simulations confirm that the main mechanism is an interaction between dispersive-wave emission and plasma-induced blue-shifted soliton recompression around the fiber zero dispersion frequency. The VUV part of the supercontinuum, the modeling of which proves to be coherent and possesses a simple phase structure, has sufficient bandwidth to support single-cycle pulses of 500 asec duration. We also demonstrate, in the same system, the generation of narrower-band VUV pulses through dispersive-wave emission, tunable from 120 to 200 nm with efficiencies exceeding 1% and VUV pulse energies in excess of 50 nJ.

Real-time Doppler-assisted tomography of microstructured fibers by side-scattering

Alessio Stefani, Michael H. Frosz, Tijmen G. Euser, Gordon K. L. Wong, Philip St. J. Russell

We introduce the concept of Doppler-assisted tomography (DAT) and show that it can be applied successfully to non-invasive imaging of the internal microstructure of a photonic crystal fiber. The fiber is spun at similar to 10 Hz around its axis and laterally illuminated with a laser beam. Monitoring the time-dependent Doppler shift of the light scattered by the hollow channels permits the azimuthal angle and radial position of individual channels to be measured. An inverse Radon transform is used to construct an image of the microstructure from the frequency-modulated scattered signal. We also show that DAT can image sub-wavelength features and monitor the structure along a tapered fiber, which is not possible using other techniques without cutting up the taper into several short pieces or filling it with index-matching oil. The non-destructive nature of DAT means that it could potentially be applied to image the fiber microstructure as it emerges from the drawing tower, or indeed to carry out tomography on any transparent microstructured cylindrical object. (C) 2014 Optical Society of America

Photochemistry on soft-glass hollow-core photonic crystal fibre

Ana M. Cubillas, Xin Jiang, Tijmen G. Euser, Nicola Taccardi, Bastian J. M. Etzold, Peter Wasserscheid, Philip St. J. Russell

Hollow-core photonic crystal fibre (HC-PCF) offers strong light confinement and long interaction lengths in an optofluidic channel. These unique advantages have motivated its recent use as a highly efficient and versatile microreactor for liquid-phase photochemistry and catalysis. In this work, we use a soft-glass HC-PCF to carry out photochemical experiments in a high-index solvent such as toluene. The high-intensity and strong confinement in the fibre is demonstrated to enhance the performance of a proof-of-principle photolysis reaction.

Doppler-Assisted Tomography of Photonic Crystal Fiber Structure by Side-Scattering

Alessio Stefani, Michael H. Frosz, Tijmen G. Euser, Gordon K. L. Wong, Philip St J. Russell

Using a non-destructive side-scattering technique, the internal structure of a microstructured fibre is determined. The rotating fiber is illuminated by a laser beam and an inverse Radon transform is applied to the frequency-modulated scattered signal.

Orbital-angular-momentum-preserving helical Bloch modes in twisted photonic crystal fiber

X. M. Xi, G. K. L. Wong, M. H. Frosz, F. Babic, G. Ahmed, X. Jiang, T. G. Euser, P. St. J. Russell

In optical fiber telecommunications, there is much current work on the use of orbital angular momentum (OAM) modes for increasing channel capacity. Here we study the properties of a helically twisted photonic crystal fiber (PCF) that preserves the chirality of OAM modes of the same order, i.e., it inhibits scattering between an order +1 mode to an order -1 mode. This is achieved by thermally inducing a helical twist in a PCF with a novel three-bladed Y-shaped core. The effect is seen for twist periods of a few millimeters or less. We develop a novel scalar theory to analyze the properties of the twisted fiber, based on a helicoidal extension to Bloch wave theory. It yields results that are in excellent agreement with full finite element simulations. Since twisted PCFs with complex core structures can be produced in long lengths from a fiber drawing tower, they are of potential interest for increasing channel capacity in optical telecommunications, but the result is also of interest to the photonic crystal community, where a new kind of guided helical Bloch mode is sure to excite interest, and among the spin-orbit coupling community. (C) 2014 Optical Society of America

Damage-free single-mode transmission of deep-UV light in hollow-core PCF

F. Gebert, M. H. Frosz, T. Weiss, Y. Wan, A. Ermolov, N. Y. Joly, P. O. Schmidt, P. St. J. Russell

Transmission of UV light with high beam quality and pointing stability is desirable for many experiments in atomic, molecular and optical physics. In particular, laser cooling and coherent manipulation of trapped ions with transitions in the UV require stable, single-mode light delivery. Transmitting even similar to 2 mW CW light at 280 nm through silica solid-core fibers has previously been found to cause transmission degradation after just a few hours due to optical damage. We show that photonic crystal fiber of the kagome type can be used for effectively single-mode transmission with acceptable loss and bending sensitivity. No transmission degradation was observed even after >100 hours of operation with 15 mW CW input power. In addition it is shown that implementation of the fiber in a trapped ion experiment increases the coherence time of the internal state transfer due to an increase in beam pointing stability. (C) 2014 Optical Society of America

Close to three-octave-spanning supercontinuum generated in ZBLAN photonic crystal fiber

Xin Jiang, Nicolas Y. Joly, Martin A. Finger, Gordon K. L. Wong, Fehim Babic, M. Saad, Philip St. J. Russell

We report the successful fabrication of a ZBLAN photonic crystal fiber with sub-micron features and large air-filling fraction and use it to generate a 10dB-flat supercontinuum (350 to 2500nm) from 140fs, 1nJ pulses at 1042nm.

Five-ring hollow-core photonic crystal fiber with 1.8 dB/km loss

M. H. Frosz, J. Nold, T. Weiss, A. Stefani, F. Babic, S. Rammler, P. St. J. Russell

A 19-cell hollow-core photonic crystal fiber reaching 1.8 +/- 0.5 dB/km loss at 1530 nm is reported. Despite expanded corner holes in the first ring adjacent to the core, and only five cladding rings, the minimum loss is close to the previously published record of 1.7 dB/km at a comparable wavelength, achieved in a fiber with seven cladding rings. Since each additional cladding ring requires a significant increase in fabrication time and complexity, it is highly desirable to use as few as possible while still achieving low loss. Modeling results confirm that further reducing cladding deformations would yield only a small decrease in loss. This demonstrates that loss comparable to the previously demonstrated lowest-loss bandgap fibers can be achieved with fiber structures that are significantly simpler and faster to fabricate. (C) 2013 Optical Society of America

Microparticle manipulation using modal superpositions in air-filled hollow-core photonic crystal fiber

Oliver A. Schmidt, Xin Jiang, Fehim Babic, Tijmen G. Euser, Philip St J. Russell